HA NOI MOULD TECHNOLOGY Co., Ltd. - Products

HA NOI MOULD TECHNOLOGY supports DFM review, mold design and build, machining, assembly, and T1/T2/T3 trials for medical and laboratory plastic components. Final material, mold concept, dimensional acceptance, surface requirements, validation plan, and production environment depend on customer specifications and technical review. Typical project scope:• DFM review covering part geometry, draft, wall thickness, parting line, gate, venting, and ejection• Mold design and tool build based on approved 2D/3D data• Review of resin behavior and critical interfaces• Machining, fitting, assembly, and trial preparation• T1/T2/T3 trials with sample inspection and agreed correction loops• Inspection reports and trial samples as agreed in the project scope Application examples:• Diagnostic and laboratory device housings• Fluid-handling or connector components• Trays, covers, and non-sterile plastic components Requirements involving cleanrooms, sterilization, biocompatibility, or regulatory compliance must be specified by the buyer and reviewed for project-specific feasibility. Buyer RFQ inputs:• Editable 3D CAD and 2D drawings/GD&T• Resin grade and relevant medical/laboratory requirements• Critical dimensions, cosmetic surfaces, and interfaces• Annual volume, target mold life, and cavity requirement• Injection machine data and validation/inspection plan• Delivery destination and Incoterm Price:On request after technical and commercial review. Contact:WhatsApp/Zalo: +84 912 308 979Email: [email protected]: www.hanoimould.com

Injection mold engineering for bottle caps, threaded or snap-fit closures, tamper-evident features and related plastic components. Feasibility is reviewed against buyer drawings, resin specification, container-neck interface, sealing and torque criteria, target cavity count, cycle target and validation scope. Scope of supply:• DFM review for parting line, threads, stripping or unscrewing concept, sealing surfaces, tamper-evident band and living hinge where applicable• Mold design and construction aligned with the approved part data and requested mold-component standards• Gate, runner, cooling, ejection and unscrewing concept based on part geometry, resin, cavity target and available injection-machine data• T1/T2/T3 trials, dimensional and cosmetic inspection, trial report and molded samples• Support for correction loops based on buyer validation of fit, torque, sealing, tamper evidence and cycle performance Buyer RFQ inputs:Please send editable 3D CAD, 2D drawings with critical dimensions and GD&T, resin grade and material-compliance requirements, container-neck finish drawing, closure style, thread, tamper-band and hinge details, sealing, opening or closing torque and leakage acceptance criteria, color or masterbatch requirements, validation method, annual and lifetime volume, cycle target, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for automotive HVAC air-vent housings, louvers, adjustment wheels and related plastic components. Feasibility is reviewed against buyer drawings, resin specification, critical dimensions, cosmetic requirements, assembly interfaces, operating-force or torque criteria and validation scope. Scope of supply:• DFM review for parting line, draft, thin louvers, ribs, bosses, clips, slider and lifter requirements, weld lines, sink marks and warpage risk• Mold design and construction aligned with the approved part data, tolerance scheme and requested mold-component standards• Gate, cooling and ejection concept based on part geometry, resin and available injection-machine data• T1/T2/T3 trials, dimensional and cosmetic inspection, trial report and molded samples• Support for correction loops based on buyer validation of fit, movement, operating force, torque and noise or rattle criteria Buyer RFQ inputs:Please send editable 3D CAD, 2D drawings with critical dimensions and GD&T, resin grade, appearance, texture and color requirements, component stack-up and assembly interfaces, movement, operating-force and torque criteria, slider, lifter and insert details, validation method, annual and lifetime volume, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for fan grilles, ventilation guards, household-appliance airflow covers and related large ribbed plastic parts. Feasibility is reviewed against buyer drawings, resin specification, open-area and airflow geometry, cosmetic and assembly requirements, validation scope and production-volume targets. Scope of supply:• DFM review for rib thickness, draft, rib intersections, weld lines, wall thickness, sink marks and warpage risk• Mold design and construction aligned with the approved part data and requested mold-component standards• Gate, runner, cooling and ejection concept based on part geometry, resin and available injection-machine data• T1/T2/T3 trials, dimensional and cosmetic inspection, trial report and molded samples• Support for correction loops and buyer validation Buyer RFQ inputs:Please send editable 3D CAD, 2D critical dimensions and tolerances, resin grade, grille open-area, airflow, structural and cosmetic requirements, assembly and fit criteria, validation method, annual and lifetime volume, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for water-purifier valve bodies, connectors, quick couplings and related water-contact plastic components. Feasibility is reviewed against buyer drawings, resin specification, sealing interfaces, thread requirements and buyer-defined pressure and leakage criteria. Scope of supply:• DFM review for sealing interfaces, threads, undercuts, inserts, parting line, wall thickness, sink marks and warpage risk• Mold design and construction aligned with the approved part data and requested mold-component standards• Gate, runner, cooling and ejection concept based on part geometry, resin and available injection-machine data• T1/T2/T3 trials, dimensional inspection, trial report and molded samples• Support for correction loops based on buyer-defined pressure, leakage and assembly validation results Buyer RFQ inputs:Please send editable 3D CAD, 2D critical dimensions and tolerances, resin grade and material-compliance requirements, operating medium and temperature, pressure range, leakage criteria and test method, thread, seal, insert and assembly details, annual and lifetime volume, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for ADAS and parking-sensor housings, connector interfaces and related plastic components. Feasibility is reviewed against buyer drawings, resin specification, critical tolerances, sealing-interface requirements and validation standards. Scope of supply:• DFM review for parting line, draft, ribs, bosses, clips, insert and connector interfaces, weld lines and warpage risk• Mold design and construction aligned with the approved part data, tolerance scheme and requested mold-component standards• Gate, cooling and ejection concept based on part geometry and available injection-machine data• T1/T2/T3 trials, dimensional inspection, trial report and molded samples• Support for correction loops and buyer validation Buyer RFQ inputs:Please send editable 3D CAD, 2D drawings with critical dimensions and GD&T, resin grade, insert and connector details, sealing and surface requirements, validation or test standards, annual and lifetime volume, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for household appliance fan covers, air-conditioner housings, washing-machine components, grilles and functional plastic parts. Feasibility is reviewed against buyer drawings, resin specification, cosmetic and assembly requirements, validation scope and production-volume targets. Scope of supply:• DFM review for parting line, draft, ribs, bosses, clips, wall thickness, sink marks and warpage risk• Mold design and construction aligned with the approved part data and requested mold-component standards• Gate, runner, cooling and ejection concept based on part geometry and available injection-machine data• T1/T2/T3 trials, dimensional and cosmetic inspection, trial report and molded samples• Support for correction loops and production approval Buyer RFQ inputs:Please send editable 3D CAD, 2D critical dimensions and tolerances, resin grade, annual and lifetime volume, cosmetic and assembly requirements, target mold life, cavity requirement, injection-machine data, validation scope, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for automotive plastic housings, covers, ducts, interior or under-hood components. Feasibility is reviewed against buyer drawings, resin specification, dimensional and cosmetic requirements, validation scope and applicable customer standards. Scope of supply:• DFM review for parting line, draft, ribs, bosses, clips, wall thickness and warpage risk• Mold design and construction aligned with the approved part data and requested component standards• Gate, cooling and ejection concept based on part geometry and available injection-machine data• T1/T2/T3 trials, dimensional inspection, trial report and molded samples• Support for correction loops and production approval Buyer RFQ inputs:Please send editable 3D CAD, 2D critical dimensions and tolerances, resin grade, annual and lifetime volume, cosmetic and validation requirements, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection mold engineering for water-filtration housings, caps, valves and connectors. Feasibility is reviewed against buyer drawings, resin specification, sealing geometry, pressure or leak-test criteria, tolerances and applicable compliance responsibilities. Scope of supply:• DFM review for sealing interfaces, threads, snap fits, wall thickness and warpage risk• Mold design and construction for PP, ABS or buyer-specified engineering resins, subject to technical validation• Gate, cooling and ejection concept based on part geometry and available injection-machine data• T1/T2/T3 trials, dimensional inspection, trial report and molded samples• Support for correction loops and production approval Buyer RFQ inputs:Please send editable 3D CAD, 2D critical dimensions and tolerances, resin grade, pressure/leak-test requirements, annual and lifetime volume, target mold life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price is prepared only after technical and commercial review. Contact: [email protected] | WhatsApp/Zalo: https://wa.me/84912308979

Injection Mold Design, Build & T1 Trial in Vietnam HA NOI MOULD-TECH supports plastic-part projects from DFM review through mold design, machining, assembly and T1/T2/T3 trials. In-house capability includes CNC milling, EDM, wire EDM, grinding, polishing, assembly and injection trials. Scope of supply:• DFM review and critical-feature alignment• 3D mold design and bill-of-material preparation• Tool construction to customer specifications and requested HASCO, DME or FUTABA requirements• Mold assembly and T1/T2/T3 trials• Dimensional inspection, trial report and molded samples• Support for correction loops and production approval Buyer RFQ inputs:Please send editable CAD, 2D drawings with critical dimensions, resin, annual and lifetime volume, cosmetic and tolerance requirements, target tool life, cavity requirement, injection-machine data, delivery destination and Incoterm. Price on request after technical and commercial review. Contact: [email protected] | https://www.hanoimould.com | WhatsApp/Zalo: https://wa.me/84912308979